GN Mud Gas Separator

Naturally as we all known, GN Solids Control Company are focusing on supplying turnkey solutions for clients on solids control systems and drilling waste management systems. It’s vital that you provide clients with highest quality tools for example shale shakers, mud cleansers, decanter centrifuges and cuttings dryer etc. Another auxiliary tools will also be quite important if this involves to show an ideal function for the entire system.


Today we wish to provide you with a brief introduction on GN mud degasser. Mud degasser can also be known as poor boy degasser sometimes.


GN mud degasser is really a helpful equipment to get rid of the gas from drilling liquids prior to the liquids is distributed to solids control systems. Even though the mud degasser isn't necessarily utilized in the drilling process, it’s quite important when there's much gas within the drilling liquids. Because an excessive amount of gas can destroy the solids control equipment. For that gas separated in the drilling liquids, a lot of it always can be SO2 that is very dangerous for people’s health. So usually there's one flare igniter associated with the mud degasser, the dangerous gases could be burnt inside a quite far place.


The mechanical structure of GN mud degasser really is easy. Simply take GNZYQ 1000A for example, the tank diameter is 1000mm. Drilling liquids first run together with the inlet pipe that is 4 inch, it will hit several baffle plates. Because of the big pressure, the collision pressure is large enough to split up the gas from drilling muds and run out of the outlet pipe that is ten inch to some flare igniter in order to another distant place.


For that after treated drilling liquids, it's delivered to solids control system for more separation. Sometimes, you will see vacuum degasser right at the back of shale shaker. The vacuum degasser can be used to get rid of gases in small diameters.


Related Arciels:



搜索栏
RSS链接
链接
加为博客好友

和此人成为博客好友

QR 编码
QR